The Operation Rules Of The Electric Hoist

The operation rules of the electric hoist are very important to the safety of the operation, and the machine itself is very important. This year I will share with you the operation process of the electric hoist.The operation process of electric hoist on Nybon Machinery Website is:

1. The mechanical part of the equipment should be checked before lifting, the wire rope, hook, limiter, etc. should be intact, the electrical part should be checked for leakage, and the grounding device should be good. Every time a heavy object is lifted, it should be stopped 10cm above the ground to stop and check the braking situation, and work can be carried out after confirming that it is in good condition. Rainproof sheds should be set up for outdoor operations.

2.Second, overloading is not allowed. When lifting, hands are not allowed to be held between the rope and the object. When the lifting object rises, avoid collision.

3. The lifting objects should be tied firmly and center of gravity. When walking with heavy loads, the heavy objects should not be too high from the ground. It is strictly forbidden for heavy objects to cross over the head of the person.

Crane

4. The electric hoist odor occurs during the lifting process, high temperature should immediately stop the inspection, find out the reason, and then continue to work.

5. The electric hoist wire rope should be neatly wound on the drum. When the hook is placed at the lowest position, the wire rope on the drum should not be less than three turns.

6. Use the suspension cable electrical switch to start, the insulation must be good, the slide must be free, and the button should be operated correctly and pay attention to the standing position of the person.

7. During lifting, when heavy objects slide down due to failure, emergency measures must be taken to drop the heavy objects to no one.

8. Lifting heavy objects must be lifted vertically. Do not pull the heavy objects diagonally. Do not lift the heavy objects.

9. After the work is completed, the electric hoist should be stopped at the designated position, the hook is raised, and the power is cut off

Nybon Machinery Website has electric hoist, chain hoist, etc., which can be produced from 500Kg to 10T and above. It is shipped from stock quickly. welcome contact us.

-----------------------------------
How to contact us

Website:https://www.nybonlift.com/

Email：info@nybonmachinery.com
Facebook page:NybonMachinery

Customer service is online 24 hours
Free online quotation, send product catalog